Outdoor 4 cameras include a mount, right angle adapter/opening tool and 2 screws. Note: The included mount is only compatible with the Outdoor 4.
The camera packaging includes all parts required to mount it to wood or brick surfaces. For best results when mounting your Outdoor 4, it's recommended that your mount is securely attached to a surface prior to attaching your camera to it.
To ensure you get the motion notifications you want, keep the following in mind when choosing the location of your Outdoor 4.
- The best motion detection occurs when movement goes across the field of view.
- Motion directly toward, or away from, the camera can be harder to detect.
- Avoid mounting near bright light flashes, swaying tree branches, or random activity such as passing vehicles.
- Learn more about camera placement.
- The signal strength for both your Wi-Fi network and Sync Module should display at least three bars.
To verify connectivity, tap Moreat the bottom right of the device's thumbnail image to access Device Settings and then select General Settings. Under the Network section, the signal strength for your Wi-Fi and Sync Module are displayed.
Options for mounting Outdoor 4
Ceiling or eave
Shelf or window ledge
Wall or post
In horizontal locations such as a ceiling or a shelf, use the right-angle adapter as shown below.
This adapter snaps into the back of the camera and onto the mount.
In vertical mounting locations such as a wall, the camera connects directly to the mount.
Note: If you're using the Battery Extension Pack, refer to these mounting instructions.