Selecciona tu cámara
el Outdoor 4
Las baterías de la cámara Outdoor 4 y la etiqueta adhesiva del número de serie (DSN) se encuentran dentro de la cubierta posterior (consulte el diagrama a continuación). Utiliza 2 pilas AA de 1,5 voltios de litio no recargables. La versión de código QR del número de serie se puede usar para escanear con la aplicación Blink para agregar su cámara a un sistema. Obtenga más información sobre cómo agregar su cámara Blink Outdoor 4 a un sistema .
Nota : las cámaras Blink solo son compatibles con baterías no recargables de litio de 1,5 voltios tamaño AA .
Algunos accesorios de la cámara Blink como el reflector y Solar Panel Mount tienen sus propias baterías.
Cómo quitar la tapa trasera
Para quitar la cubierta trasera de la cámara Blink Outdoor 4, use la herramienta de apertura incluida o un destornillador grande.
1. Gire el tornillo hacia la izquierda (en sentido antihorario) hasta que gire libremente.
2. Use la herramienta de apertura para hacer palanca suavemente en una dirección, levantando la tapa trasera.
Cómo reemplazar la cubierta trasera
Para asegurarse de que la tapa trasera esté colocada correctamente, se incluye un vástago en su diseño. La tapa trasera solo encaja cuando el vástago está alineado con la abertura de la cámara.
1. Alinee el vástago de la tapa posterior con la abertura junto al puerto USB de la cámara y presione para cerrar.
2. Utilice la herramienta de apertura, una moneda o un destornillador grande para girar el tornillo hacia la derecha (en el sentido de las agujas del reloj) unas tres vueltas hasta que la tapa trasera quede al ras con la cámara.
Blink Video Doorbell
We are currently translating the article, please give Helpjuice a few moments while it goes through the article and refresh the page.
Outdoor e Indoor (3.ª generación)
Outdoor (3rd Gen) and Indoor (3rd Gen) cameras have batteries and a Serial Number (DSN) sticker inside the back cover. You need the serial number to add the device to a system. For your convenience, we added a QR code version of the serial number to scan with the Blink mobile app.
Image of battery compartment and QR code
Indoor (3rd Gen) is left and Outdoor (3rd Gen) on the right
Some Blink camera accessories like the Floodlight and Solar Panel Mount have their own batteries.
Click to learn about adding an Outdoor (3rd Gen) or Indoor (3rd Gen) camera to your system.
How to remove the back cover
Before trying to remove the back cover, you must remove the camera from any mounts or accessories. This includes any third-party products.
Your camera shipped with a silicone disc covering the screw that secures the back cover.
The screw slot allows you to use the included opening tool/mount adapter unscrew the camera back. You can also use a coin, or flathead screwdriver.
A plastic sticker on the back of the camera shows the direction to turn. Turn left (counter clockwise) to open, and right (clockwise) to close.
Remove the film before camera use.
To remove the back cover and open the camera
1. If it is present, remove the silicone protective cover from the fastening screw, and keep it for future use.
2. Use the included opening tool, to turn the screw counter-clockwise (turning to the left) until the screw spins freely.
3. Apply side pressure on the opening tool to gently pry the cover loose. As shown in the illustration, be careful to hold the camera on its side, to allow the cover to come off.
3.a. (Accessibility) Another way to remove the back cover after it is unscrewed completely, is to turn the opening tool around and insert the mounting end into the camera's back cover (you will feel and hear a click when the mount is secured). Then, if you pull the opening tool gently, the camera's back cover also comes off because the two are now attached.
To secure the back cover and close the camera
1. Align the guide notches as shown, and gently hold the cover in place against the camera body.
2. Turn the screw clockwise (turning to the right) approximately three turns, or until snug. Take care to prevent over-tightening. The cover should be flush with the camera body when you are done.
XT 2 y XT
Este artículo le mostrará cómo quitar la tapa de la batería de su nueva cámara Blink XT . También puede ver un video sobre cómo eliminarlo haciendo clic aquí .
1. Sostenga la cámara de modo que la parte posterior quede frente a usted.
2. Verá un interruptor gris con una flecha apuntando hacia la parte inferior de la cámara. Deslice y sostenga eso en la dirección de la flecha.
3. Mientras hace esto, tire hacia arriba de la tapa de la batería con el pulgar. Esto puede requerir algo de fuerza ya que la cámara es hermética.
4. Levante la tapa de la batería de la cámara.
Eso es todo, ahora puede insertar las baterías y acceder al número de serie del dispositivo (DSN) de su cámara.
Indoor (generación 1)
El pestillo para quitar la cubierta posterior de la cámara Indoor (gen 1) está en la parte inferior. Deslice el pestillo para liberar la tapa de la batería.
Haga clic aquí para saber cómo quitar la tapa de la batería de la cámara Blink Indoor y Outdoor .
El Blink Mini no utiliza pilas.